I have a well used washing machine that finally tiny the 
dirt, and so I’ve chosen to try a number of work using its keeps. I want to try to make a mechanical chicken plucker using the bath and engine. I taken apart and restored all of the helpful section and scrap steel, but when it had gotten to trying to make the electric motor rotate, I immediately got jammed. I am hoping somebody can aim me when you look at the proper movement.
Here you will find the standards: automatic washer unit: Whirlpool LA7800XP engine: c68pxefd-3454
Below are some photo associated with the electric motor and wiring:
I might tremendously love any assistance/advice.
Feedback and Replies
- Sep 23, 2014
- Sep 23, 2014
Hi, Baluncore . many thanks for the responses. Yes, I had stumble upon that bond early in the day within my investigation on the web. We used the tips as intently when I could, but the circumstances’s a little bit various. There isn’t a block on the exterior as envisioned within the thread, just free cables. Likewise, my personal hues are wide and varied. This is what I carried out yet via experimentation:
With this settings, I have strength originating from my own challenge direct connected to the energy remove, directly into the capacitor. After that, from capacitor to motor by way of the red wire. White connects to neutral over at my experience contribute, and ground goes to the electric motor housing. Right now, as I hook the environmentally friendly cable starting while in the motor to natural, the engine rotates. However, it rotates most gradually (maybe 100 rpm or more), and after several mere seconds slows down further. Linking the pink line to basic on top of that because the environmentally friendly cable is connected to neutral makes little difference. Joining the violet line to basic without connecting the eco-friendly cable to natural brings a hum, but no movement.
